Groups; Groups Overview; Adding Groups - Iomega px4-400r User Manual

Groups

Groups Overview

Groups consist of one or more users, and administrators can grant each group rights to Shares on the px4-
400r Network Storage. Users can belong to more than one group. The Groups page enables administrators
to create one or more groups, and grant each group rights to Shares on the px4-400r. Security must be
enabled before you can create groups.
Refer to the Security
you have not done so already.
By default, there are no groups defined. Once an administrator defines one or more groups, the Groups
functionality is dynamically available when creating, modifying, and viewing users, Shares, and groups.
How Access Rights Are Granted Using Groups in Workgroup Mode
When groups are defined in Workgroup mode, a user's access rights are the most rights granted to the
user and all groups to which the user belongs. For example, assume 3 Shares exist (SF1, SF2, and SF3),
two users (UserA and UserB), and three groups (Group1, Group2, Group3). When created, UserA was not
granted access rights to any Share, and UserB was granted Read rights to SF3. Group1 has Read/Write
rights to SF1, Group2 has Read/Write rights to SF2, and Group3 has Read/Write rights to SF3. If UserA is
added to Group1, UserB is added to Group2, and Group1 is added to Group3, the table below shows the
resulting access rights for each user and group defined:
Name Member of Group
UserA Group1, Group3
UserB Group2
Group1 Group3
Group2 none
Group3 none

Adding Groups

1. On the Groups page, click
2. From the Information section, give the new group a name.
3. To add users to the group, click
Select the checkbox in the title bar to add all listed users.
4. Click Apply to save your changes.
page to enable security permissions and create an administrator account, if
Access Rights
SF1 - Read/Write SF3 - Read/Write
SF2 - Read/Write SF3 - Read
SF1 - Read/Write SF3 - Read/Write
SF2 - Read/Write
SF3 - Read/Write
Add a group. The Information section opens.
Add users. Select a user or users to include in the group.
Securing Your px4-400r Network Storage and Contents
Groups 83