Safety Instructions And Warnings; Components - MAKO TOOLS SROM 1197 Instruction Manual

1.

SAFETY INSTRUCTIONS AND WARNINGS:

The equipment complies with the safety regulations required for electrical equipment.
Read through the instructions for use before starting up the equipment.
Improper use can lead to personal Injury and properly damage. Persons who are not familiar with the
instructions may not operate the equipment. Keep the instructions for use in safe custody. Children
and youths are not permitted to operate the equipment
2.

COMPONENTS:

1. Saw Table
2. Saw Blade Guard
3. Push Stick
4. Saw Blade
5. Riving Knife
6. Table Insert
7. Rip Fence
8. Hand Wheel
9. Adjusting and Locking Nut
10. Base Frame
11. On/Off Switch
12. Rip Fence Clamp
13. Rubber Foot
14. Cross Slide
15. Pivot Screw
16. Extractor Adapter
17. Countersunk Screw
A. Leg Brace
a. Hex Screw
c. Flat Washer
Items supplied
Please check that all parts are included as specified above. If parts are missing, please
contact the sales outlet where you made your purchase at the latest within 5 working days
after purchasing the product and upon presentation of a valid receipt .
•
Open the packaging and take out the equipment with care.
•
Remove the packaging material and any packaging and/or transportation braces (if used).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for transport damage.
•
If possible, please keep the packaging until the end of the guarantee period.
Danger!
The equipment and packaging material are not toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of swallowing or suffocating!
x4
Hole (riving knife)
18.
19. Fastening Bolt
Pivot Clamp/Handle
20.
21. Table Groove
22. Scale
23. Fence Rail
24. Fence Bracket
25. Slot in Fence
26. Screw and Nut
27. Slot in Fence
28. Guide Rail
29. Leg x4
30. Cross Rail x2
31. Side Rail x 2
32. Side Table Braces
33. Table Width Extension
Tool Hook
34.
b. Spring Washer
d. Nut
x2
x4
x2