Imdc-Rim Power Wiring; Network Cable Wiring Between Imdc-Main And Imdc-Rim; Wiring When Ports Are Enough To Connect Network Device - IDTECK iMDC-MAIN User Manual

5

iMDC-RIM POWER WIRING

Confirm that main power switched OFF before wiring.
Connect +12V (red) wire of DC12V power supply to Power terminal block (+12V) of iM
●
DC-RIM.
Connect GND (black) wire of DC12V power supply to Power terminal block (GND) of iM
●
DC-RIM.
6 NETWORK CABLE WIRING BETWEEN iMDC-MAIN AN
D iMDC-RIM
6.1

WIRING WHEN PORTS ARE ENOUGH TO CONNECT NETWORK DEVICE

Follow below the '(Figure: solution.1)' for wiring if there are enough TCP/IP ports to connect
network devices (hub, router, etc).
p.28 WIRING