Download Print this page

G&G TC-H Series Operating Manual page 5

Electronic weighting balances

Advertisement

'MSComm1.Output = Chr(27) + Chr(112)
'MSComm1.Output =Chr(27) +"p"
Do
DoEvents
Loop Unti MSComm1.InBufferCount = 14
a = MSComm1.Input
Print a
8. Structure
1、Scale pan 2、Level indicate
5、TARE key
6、Power Key
9. The Warranty
9.1 We provide warranty within the scope of the statutory regulations, however we are entitled to either
repair or replace the defective product.
9.2 Within two years after purchase, the producer offers a free repair service to all G & G Product, which
become defect under proper usage without human damage. The customers are kindly requested to mail the
product as well as its original proof of purchase to the producer. Notification of defects and complaints shall
be made in writing after the delivery has been received at the point of delivery. For legitimate notifications of
defects and warranty cases we are entitled at our own discretion to either replace the delivery at the prices
which were valid at the time of the complaint or to rectify the defect.
9.3 We have the right to try to replace the defective product at most twice. There will be a slight charge for
the repair service of those products, by which the warranty period expires. Defective goods may only be
returned to us by the customer with our express approval and at the customer's cost and risk. The notification
3、LED Display windows 4、CAL Key
Compound key
7、
8、Level adjust

Advertisement

loading

This manual is also suitable for:

Tc3khTc6khTc10khTc15khTc30khTc3kha ... Show all