Table of Contents
Advertisement
Secure the Cable
To prevent fraying or cutting the
anemometer cable where it is exposed to
weather, secure it so it doesn't whip about
in the wind. Use cable clips or weather
resistant cable ties to secure the cable.
Place clips or ties approximately every 3 to
5 feet (1 to 1.6 m).
CAUTION: Do not use metal staples to secure cables. Metal staples can cut the cables.
Configure your Console
1. On your Vantage Pro 2 console, enter the Setup Mode by pressing DONE
and the - key at the same time.
2. Press DONE repeatedly to scroll through the screens until you come to the
Wind Cup Size screen.
3. Press the + and - keys to toggle the sizes until OTHER appears.
4. Press and hold the DONE key to exit Setup Mode and return to the Current
Weather Screen.
Start receiving data
Your new Sonic Anemometer will begin sending data after about a minute of
initialization and solar exposure before the first packet is sent.
Cable Tie
Cable Clip
7
Advertisement
Table of Contents
