DAVIS 6415 User Manual page 8

Connect to the Vantage Pro2 Sensor Suite
1. Open the transmitter shelter and disconnect the solar cable so that you can
remove the cover.
2. Pull the foam insert out of the
cable access port and set the foam
aside.
3. Insert the Sonic Anemometer
cable end into the cable access
port from beneath the box.
4. Firmly insert the RJ connector
into the socket labeled WIND.
5. Firmly insert the foam in between
the cables and at the top of the
cable access port, taking care to
ensure that the foam seals the
access port entirely, leaving no
holes or gaps large enough for
weather or insects. You may have
to stack the cables to allow the foam to fit.
6
Sensor
Interface
Foam
Insert