Table of Contents
Advertisement
Installation and User Guide
DS6x00 EtherNet/IP Scanner
Right click on the new adapter in the I/O Configuration list and choose
"ETHERNET-MODULE Generic Ethernet Module"
Fill in the Connection Parameters and IP Address for the Datalogic Scanner and assign a
Name. For this example, the IP Address is "192.168.0.200" and the Name is "DL". This
example configures ControlLogix for access Assembly Instance 0x65 (138 bytes) for inputs
and Assembly instance 0x71 (3 bytes) for outputs.
© 2004 Datalogic S.p.A. – All Right Reserved
Rev 1.02
Page 39 of 54
Advertisement
Table of Contents
