TATA Motors TIAGO Owner's Manual page 139

EMERGENCY AND BREAKDOWN ASSISTANCE
NOTE
The jack is designed only to raise

and hold the vehicle for a short
time while a wheel is being
changed. It is not suited for per-
forming maintenance work un-
der the vehicle.
Use the jack on level, hard

ground. Avoid changing the
wheel on uphill and downhill
slopes. Chock the wheels, if the
deflated wheel needs to be
changed on slope / ghat area.
Before raising the vehicle, se-

cure it from rolling away by ap-
plying the parking brake.
Do not use wooden blocks or

similar objects as a jack under-
lay.
Do not place your hands and

feet or lie under the raised vehi-
cle when it is supported by a
jack.
Do not run the engine when the

vehicle is supported by the jack
128
and never allow passengers to
remain in the vehicle.
Do not open or close a door or

the tailgate when the vehicle is
raised.
Assemble the Jack handle and wheel
spanner (as shown in fig.).
Position the jack vertically and raise it by
turning the jack handle clockwise until
the jack sits completely on the specified
point and the base of the jack lies evenly
on the ground.
The jack up points are indicated by cut-
outs on the front and rear.
Jack up point location on vehicle
Jack up point location
Front Jacking location