Table of Contents
Advertisement
3 FRONT
A Pro I/O device can be addressed through two different
ways, either via a
connection.
Therefore different commands are needed to be sent from
the ProCommander, to address the Pro I/Os correctly.
The ProCommander decreeds an intern chart, which match
for every device or Sub-device-address an
Thus each device will be addressed correctly.
The values in this chart will be set with the following
commands: (X = Sub-device-ID, of the respective Pro I/Os device)
IP-Address: !spiX=10.0.0.201#
3.1 Daisy chain connection
Port: !sppX=5555#
For a
daisy chain
commands to one and the same Pro I/O device, independently of
the respective sub-device-ID. All other commands get redirected
automatically to all lined up Pro I/Os, through this first Pro I/O. In
order that this works easily the network address
port
of each sub-device have to have the same value.
daisy chain
connection or via a network
connection the ProCommander sends all the
FRONT
IP address
and port.
(IP
address) and
13
Advertisement
Table of Contents
