Subscribe to Our Youtube Channel
Related Manuals for Azbil KUX60G
Summary of Contents for Azbil KUX60G
- Page 1 CM2-KUX100-2001 Field Mount type P/I Converter Model KUX60G (Waterproof) Model KUX70G (Explosion-proof) User’s Manual...
- Page 2 In no event is Azbil Corporation liable to anyone for any indirect, spe- cial or consequential damages. This information and specifications in this document are subject to change without notice.
- Page 3 Thank you for purchasing the Azbil Corporation’s Model KUX60G/ 70G field mount P/I converter. The model KUX60G/70G offers high performance and is provided with highly reliable P/I converters with a microprocessor incorporated in each one.
- Page 5 For correct and safe use of the instrument, be sure to observe the cautions described in the following pages. Azbil Corporation will not be responsible for any damage that is a result of handling of the product without heeding these cautions.
-
Page 6: Safety Precautions
• Use a power supply that conforms to the specifications. Using a wrong power supply may damage the instrument. Cautions on maintenance WARNING KUX60G / KUX70G - Field mount type P/I converter... - Page 7 • If the instrument is used in an explosion-proof area, do not leave the Product uncovered to avoid sparks or ignition. CAUTION This instrument is shipped under strict product control by Azbil Corporation. Do not modify the instrument under any circumstances as this could result in permanent damage to the instrument.
- Page 8 Safety Azbil Corporation KUX60G / KUX70G - Field mount type P/I converter...
-
Page 9: Table Of Contents
Table of Contents Safety About this manual ....................i Safety precautions ....................ii Chapter 1 : Description of parts 1-1 : Description of parts ..................1-1 Chapter 2 : Installation 2-1 : Precautions ....................2-1 2-2 : Installation to pipe ..................2-1 2-3 : Piping ...................... - Page 10 Table of Contents...
-
Page 11: Chapter 1 : Description Of Parts
Figure 1-1 Front view of model KUX60/70 Terminal Zero adjustment terminal pin O-ring Terminal box cover Holes for Grounding mounting terminal bracket Conduit plug Cover locking screw Hex-wrench key Figure 1-2 General view (rear view) KUX60G / 70G - Field mount type P/I converter... - Page 12 Description of parts Azbil Corporation Mounting bracket (Option) U-bolt for mounting on 2 inch pipe Figure 1-3 Mounting brackets (Optional) KUX60G / 70G - Field mount type P/I converter...
-
Page 13: Chapter 2 : Installation
Do not tighten by holding the housing of the product as this may damage the converter. Avoid holding the housing when tightening without a wrench (See Figure 2-1). • Install the converter in a location where there will be no excessive impact or vibration. KUX60G / 70G - Field mount type P/I converter... -
Page 14: Piping
Screw (M5) Screw (M5) Screw (M5) 86 or 126 U bolt on 2 inch pipe Figure 2-2 Installing the converter with mounting brackets on a 2 in. pipe and a panel KUX60G / 70G - Field mount type P/I converter... - Page 15 Azbil Corporation Installation Figure 2-3 KUX60G / 70G - Field mount type P/I converter...
- Page 16 Installation Azbil Corporation KUX60G / 70G - Field mount type P/I converter...
-
Page 17: Chapter 3 : Wiring
Either terminal may be used. The grounding terminal must be connected to a ground having a resistance of 100Ω or less. 3-2 : Power supply Power supply to the converter should be between 11.5V DC and 30V DC. KUX60G / 70G - Field mount type P/I converter... - Page 18 Wiring Azbil Corporation KUX60G / 70G - Field mount type P/I converter...
-
Page 19: Chapter 4 : Maintenance
Are the grounding cable, cover or housing locking screw loose? • Are the terminal screws loose? • Is there any deterioration in the O-rings? • Is there any leakage from the connection pipes? KUX60G / 70G - Field mount type P/I converter... - Page 20 Maintenance Azbil Corporation KUX60G / 70G - Field mount type P/I converter...
-
Page 21: Chapter 5 : Spare Parts
Unit qty. for per unit resale Case cover (with an O-ring) 80370406-001 O-ring 80020935-842 Gland packing set 80373094-001 Plug (with an O-ring) 80387115-002 Mounting bracket 80370404-001 “1-F” is equal to “10EA” ~Note KUX60G / 70G - Field mount type P/I converter... - Page 22 Spare parts Azbil Corporation KUX60G / 70G - Field mount type P/I converter...
- Page 24 Warranty period and warranty scope 1.1 Warranty period Azbil Corporation’s products shall be warranted for one (1) year from the date of your purchase of the said products or the delivery of the said products to a place designated by you.
- Page 25 Although acceleration of the above situation varies depending on the conditions or environment of use of the products, you are required not to use any Azbil Corporation’s products for a period exceeding ten (10) years unless otherwise stated in specifications or instruction manuals.
- Page 27 Document Number: CM2-KUX100-2001 Document Name: Field Mount type P/I Converter Model KUX60G (Water proof) Model KUX70G (Explosion-proof) User’s Manual Date: 1st edition: Jun. 2002 3rd edition: Jan. 2020 Issued/Edited by: Azbil Corporation...
Need help?
Do you have a question about the KUX60G and is the answer not in the manual?
Questions and answers