Honda Rebel 2020 Series Owner's Manual page 107

Installation
Attach the side collars to the wheel.
1.
On the left side, place the wheel between
2.
the fork legs and insert the front axle
shaft, through the left fork leg and wheel
hub.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
Tire Puncture
Align the end of the front axle shaft with
3.
the surface of the fork leg.
Tighten the left axle pinch bolts to hold
4.
the front axle shaft.
Install and tighten the front axle bolt.
5.
Torque: 38 lbf·ft (51 N·m, 5.2 kgf·m)
Loosen the left axle pinch bolts.
6.
Tighten the right axle pinch bolts.
7.
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m)
Removing Wheels
u
Surface of
fork leg
End of front
axle shaft
Continued
105