Safety/Warranty/Warranty Registration; Important Safety Instructions; Save These Instructions; Limited Warranty - Tripp Lite Utility/ Work Truck DC-to-AC Inverters Owner's Manual

Utility/work truck dc-to-ac inverters

Table of Contents

Important Safety Instructions

SAVE THESE INSTRUCTIONS!

This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite Inverters.

Location Warnings

• The Inverter must be located in an enclosed compartment, shielded

from outside weather conditions.

• Although your Inverter is moisture resistant, it is NOT water-proof.

Flooding the unit with water will cause it to short circuit and could

cause personal injury due to electric shock. Never immerse the unit,

and avoid any area where standing water might accumulate. Mounting

should be in the driest location available.

• Leave a minimum of 2" clearance at front and back of the Inverter for

proper ventilation. To avoid automatic Inverter shutdown due to

overtemperature, any compartment that contains the Inverter must be

properly ventilated with adequate outside air flow. The heavier the load

of connected equipment, the more heat will be generated by the unit.

• Do not install the Inverter directly near magnetic storage media, as this

may result in data corruption.

• Do not install near flammable materials, fuel, chemicals or gasses

Battery Connection Warnings

• The Inverter will not operate (with or without utility power) until

batteries are connected.

• Multiple battery systems must be comprised of batteries of identical

voltage, age, amp-hour capacity and type.

• Because explosive hydrogen gas can accumulate near batteries if they

are not kept well ventilated, your batteries should not be installed in a

"dead air" compartment. Ideally, any compartment would have some

ventilation to outside air.

• Sparks may result during final battery connection. Always observe

proper polarity as batteries are connected.

• Do not allow objects to contact the two DC input terminals. Do not

short or bridge these terminals together. Serious personal injury or

property damage could result.

Limited Warranty

Tripp Lite warrants its Inverters to be free from defects in materials and workmanship for a 30 month period from the date of retail purchase by end user.

Tripp Lite's obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty you must obtain a Returned Material

Authorization (RMA) number from Tripp Lite or an authorized Tripp Lite service center. Products must be returned to Tripp Lite or an authorized Tripp Lite service center with transportation charges

prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment which has been damaged

by accident, negligence or misapplication or has been altered or modified in any way, including opening of the unit's casing for any reason. This warranty applies only to the original purchaser

who must have properly registered the product within 10 days of retail purchase.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE

USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, Tripp Lite is not liable for any costs, such as lost profits or revenue, loss of equipment,

loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

Equipment Connection Warnings

Do not use a Tripp Lite Inverter in life support or healthcare

applications where a malfunction or failure of a Tripp Lite Inverter

could cause failure of, or significantly alter the performance of, a

life support device or medical equipment.

• You may experience uneven performance results if you connect a surge

suppressor, line conditioner or UPS system to the output of the Inverter.

• Corded Models: Do not modify the Inverter's plug or receptacle in a

way that eliminates its ground connection. Do not use power adapters

that will eliminate the plug's ground connection.