LG D2000N Owner's Manual page 13

CAUTION
Connect the signal
y y
input cable and tighten
it by turning the screws
clockwise.
Do not press the screen with your finger for
y y
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the
y y
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
NOTE
When you want to use two PC in our Monitor,
y y
please connect the signal cable(DVI-D/
HDMI) respectively in Monitor set.
When connecting the power cord to the
y y
outlet, use a grounded (3-hole) multi-socket
or a grounded wall outlet.
If you turn the Monitor set on while it is cold,
y y
the screen may flicker. This is normal.
Some red, green, or blue spots may appear
y y
on the screen. This is normal.
USING THE MONITOR SET
13