Kogan ACTIVE PRO GPS ALWAYS-ON DISPLAY SMART WATCH Quick Start Manual page 13

Timer
Allows setting a countdown timer. The watch will vibrate once this time has elapsed.
Alarm clock
You can set alarm clocks from the mobile APP.
When it is the set time, the Watch will alert you through vibration. In the case of no
operation after 20 seconds, the alarm clock will automatically stop. After 5 minutes, the
alarm clock will then vibrate again. Press UP/DOWN button to engage the Snooze function,
and after 5 minutes the alarm clock will alert you again. Slide up to turn off alarm reminder.
Call reminder
Enable the Call Reminder function in the mobile APP and keep a constant Bluetooth
connection between the Watch and the phone. When there is an incoming call, the Watch
will alert you through vibration. Close the call pop-up by pressing UP/DOWN button. Slide
up to reject a call.
7. Control Centre
DND (do-not-disturb) mode
Slide up once on the dial interface and enter control centre interface. Tap DND icon
lighten the icon
disable DND mode.
Brightness adjustment
Slide up once on dial interface and enter control centre interface and tap again to cycle
through brightness levels: 2 (default) > 3 > off > 1
System settings
Slide up once on the dial interface and enter control centre interface. Tap System Setting
icon to enter system settings.
In system settings, you can enter:

Dial settings: Tap and enter this function to switch dials among different styles.

UP button function settings: Tap and enter this function to set sports style entered
by pressing and holding UP button.

Factory data reset settings: Tap to enter factory data reset procedure.

Firmware information: Tap and enter to view firmware information and Bluetooth
address.
and enable DND mode. Tap DND icon again to dim the icon and
to