Safety; Safety Marking; Safety Devices; Safety Notes - Tecno-gaz ONYX B 5.0 Instructions For Use Manual

03
3.1

Safety marking

3.2

Safety devices

The following safety devices are installed:
1. Safety valve set at 2.4 bar 0/+10%
2. Electromagnetic lock to prevent the door from opening while the cycle is running
3. Resistance over temperature thermostats
3.3

Safety notes

1. The manufacturer is liable for the marketed product in accordance with current
regulations. The manufacturer's liability will expire when operations are carried out
on the device, or a part of it, by unskilled personnel or using non-original spare parts.
2. There should be no potential risk of explosion and/or fire in the room where the
autoclave is installed.
3. The autoclave should be installed in a special well-ventilated room.
3.4 Disposal
Refer to annex
Cod. 0Z00H0004

SAFETY

HAZARDOUS
VOLTAGE
DISCONNECT
THE POWER
BEFORE
REMOVING
THE LID
ENGLISH
HIGH
TEMPERATURE
EARTH
CONNECTION
5