Subscribe to Our Youtube Channel
Related Manuals for Childcare Vogue Lite M II
Summary of Contents for Childcare Vogue Lite M II
- Page 1 Vogue Lite M II Stroller “Black” Model # 015270 IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS Read all instructions before assembly and use of the stroller. Keep instructions for future use. WARNING TO AVOID INJURY OR DEATH: FOLLOW THE MANUFACTURER’S INSTRUCTIONS. PUT ON ALL THE BRAKES WHENEVER YOU PARK THE STROLLER. DO NOT LEAVE CHILD UNATTENDED. SECURE THE CHILD IN THE HARNESS AT ALL TIMES. - Page 3 Assembly contents list Assembly / Operating instructions How to care for your Childcare Vogue Lite M II Stroller Due to variations in the style and design of our products, the photographs and illustrations shown in this instruction manual are generic, therefore product fabrics, colour and design may vary from images shown.
- Page 4 ASSEMBLY CONTENTS Check what you have received... You have received 1 box. Please check the contents of the box against the list below. If anything is missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000.
- Page 5 ASSEMBLY / OPERATING INSTRUCTIONS Unfolding the Stroller... Position the Stroller Frame on a stable floor. Disengage stroller frame lock on side of handle to release stroller frame. Lift stroller handle up until frame completely opens and “clicks” into position. To assemble Rear Wheels... Insert Rear Wheel into rear wheel housing on back leg until it “clicks”...
- Page 6 ASSEMBLY / OPERATING INSTRUCTIONS To assemble Bassinet... WARNING DO NOT USE THIS BASSINET ONCE THE CHILD CAN SIT UP UNAIDED. DO NOT USE FOR UNSUPERVISED SLEEPING. Ensure buckle on underside of seat is unclasped. Release 2 x press stud straps on underside of seat. Completely loosen the backrest adjuster.
- Page 7 ASSEMBLY / OPERATING INSTRUCTIONS To operate Canopy... Pull the canopy forward or backward to desired position. Pull out the sunvisor from the inside of the hood. To adjust handle height... The handle has 4 height adjustments. To adjust handle, hold handle adjustment button and lift or lower handle to the desired position.
- Page 8 ASSEMBLY / OPERATING INSTRUCTIONS Using the Tether Strap... Ensure tether strap is used at all times. Make sure your hand is fed through the loop as shown in the diagram. WARNING USE THIS STRAP TO STOP THE STROLLER ROLLING AWAY To convert to Stroller...
- Page 9 ASSEMBLY / OPERATING INSTRUCTIONS Adjusting the Backrest... This stroller has a multiple position adjustable backrest. The upright position on the backrest is not suitable for use with children less than six months old. For use with a newborn (0 - 6mths), the seat should be fully reclined. The backrest should only be adjusted to a more upright position as the child grows older and is able to support their head without assistance.
- Page 10 ASSEMBLY / OPERATING INSTRUCTIONS Restraints - Harness... To secure the harness,insert each clip into the corresponding slot in the harness buckle. Once all attached, carefully adjust the harness straps by pulling each slider until the desired fit is achieved in the lap, shoulder and crotch straps.
- Page 11 ASSEMBLY / OPERATING INSTRUCTIONS To adjust Shoulder Strap Height... Undo the harness buckle. Remove shoulder strap from shoulder pad. Feed shoulder strap and clip back through current shoulder strap slot. Feed shoulder strap and clip through one of the higher shoulder strap slots. Re-fit shoulder pad to the shoulder strap.
- Page 12 ASSEMBLY / OPERATING INSTRUCTIONS To attach Boot Cover... Align zipper on Boot Cover with zipper on inside of Seat fabric. Completely zip Boot Cover to Stroller fabric. Wrap top of Boot Cover around Bumper Bar and secure with Velcro. To attach Rain Cover... Open rain cover completely.
- Page 13 ASSEMBLY / OPERATING INSTRUCTIONS To remove Front Wheels... Pull the Rear Wheel release button on the underside of the Rear Wheel housing. Remove Rear Wheel from the Rear Wheel housing. To remove bumper bar... Press the Bumper Bar release button on the outside of the Bumper Bar whilst pulling Bumper Bar away from Stroller.
- Page 14 ASSEMBLY / OPERATING INSTRUCTIONS To fold Stroller... NOTE: The Stroller can only be folded compactly when using in forward facing Seat mode. Ensure Seat is in forward facing mode or removed before folding. Close the Canopy until flat. Adjust backrest to the most upright position. Pull and hold Seat backrest lever whilst pushing Seat forward until fully folded.
-
Page 15: Maintenance
HOW TO CARE FOR YOUR CHILDCARE STROLLER Cleaning To ensure the long-lasting use of your stroller, dry it with a soft absorbent cloth after use in rainy weather. Use a damp cloth to clean the frame. Do not use abrasive cleaners. After using your stroller on the beach, clean the frame and wheels thoroughly with water to remove the sand and salt. - Page 16 Currently, CNP Brands boasts one of the most diverse brand portfolios with a combination of company owned brands and distribution agreements. Our own brands, including Childcare, have gone from strength to strength in recent years. Childcare, and our premium brand bebe care, demonstrate our commitment to quality and continuing...
- Page 17 NOTES...
- Page 18 Distributed in Australia by CNP Brands Distributed in New Zealand by Wainhouse 82 Maribyrnong Street, Footscray, VIC, 3011 Distribution Customer Service 1300 667 137 2-6 Argyle St, Morningside, PO Box 41-014, W: www.cnpbrands.com.au St Lukes, Auckland, New Zealand E: info@cnpbrands.com.au Customer Service: 0800 567 5000 F: www.facebook.com/CNPBrands I: @cnp_baby...
Need help?
Do you have a question about the Vogue Lite M II and is the answer not in the manual?
Questions and answers