Advertisement
ASSEMBLY / OPERATING INSTRUCTIONS
To adjust Waist Strap...
1a.
1
1b.
Tether Strap...
1a.
1
To attach Bumper Bar...
1a.
1
12
To loosen waist strap, push up both top and bottom
straps through buckle as circled in diagram.
To place waist strap in desired position, slide the
bottom strap into position then pull the top strap and
tighten into position.
WARNING
USE THIS HARNESS AT ALL TIMES
Ensure tether strap is used at all times.
Make sure your hand is fed through the loop as
shown to the right.
To attach the bumper bar, gently insert the
bumper into the slots until they click into position.
Top strap
Bottom
strap
Advertisement
