Film Loading; Changing The Lens - Sony FVS-1000 Series Operation Manual

Film Loading

Changing the lens

Change the lens according to the film size (16-mm or
35-mm), and change the gate assembly, PAD
assembly, etc. on the film mount table.
To change the lens
1
Press the LENS EXCHANGE button.
The button starts flashing, then lights after a few
seconds.
LENS EXCHANGE button
2
When the button lights, open the rear door.
3
Pull up the two lock levers to release the lock.
Lock levers
4
Pull out the camera block.
Camera block
5
Disconnect the lens connector on the camera block.
Lens connector
6
Turn the lens mount lever in the direction of the
arrow, then remove the lens.
Lens Lens mount lever
15