Sony FVS-1000 Series Operation Manual page 30

Menu Operations
Item
TEST SG CONTROL Output of test signals is controlled. Select from among OFF, H
INPUT
HD INPUT SELECT
SD1, SD2 INPUT SELECT
SYSTEM
EXT DEVICE DLY
HD INPUT
REMOTE/LOCAL
LOCAL ENA
REMOTE ENA
a) Function not available now
28
Setting(s)
RAMP COLOR, H RAMP MONO, V RAMP COLOR, V RAMP
MONO, MULTI BURST, 100% COLOR BAR, 75% COLOR
BAR, BLACK, and WHITE. (These signals are not in LOG
format.)
Select an input signal type for HD from among 4:2:2 (LINK A/
B), 4:4:4 (Y/C), and 4:4:4 (RGB).
Note
This page appears only when the BKFV-100/1 is installed.
Select an input signal type for an SD1 or SD2 from among
4:2:2 (LINK A/B), 4:2:2:4, 4:4:4:4 (Y/C), 4:4:4:4 (RGB), 8:4:4H,
a)
8:4:4V, 8:8:8 (Y/C) , and 8:8:8 (RGB)
Adjust the amount of delay of a video signal when it passes
through an external device in SIGNAL PATH mode with the
leftmost control knob.
Adjust the amount of delay of a video signal input to HD.
Restrict control from the local panel in remote mode.
ALL DISABLE: Control from the local panel is inhibited in
remote mode.
STOP: Only the STOP button is enabled in remote mode.
STANDBY: Only the STANDBY button is enabled in remote
mode.
STOP&STANDBY: The STOP and STANDBY buttons are
enabled in remote mode.
Restrict control from the local panel in local mode.
ALL DISABLE: Control from the local panel is inhibited in local
mode.
REMOTE: Switching remote and local are enabled in local
mode.
Mode Operation
a)
.
No. No.