Table of Contents
Advertisement
■
To turn the power ON/OFF with the remote
control
To turn the power on
●
When the power of the unit is on (Power Indicator
- orange or purple), press the <Standby (ON/OFF)
button> (
), then the picture will be displayed.
●
Power Indicator: Blue (Picture is displayed.)
To turn the power off
●
When the power of the unit is on (Power Indicator -
blue), press the <Standby (ON/OFF) button> (
then the power will be turned off.
●
Power Indicator: Orange (standby)
Note
●
During operation of the "Power management"
function, the power indicator turns purple in the power
off state.
●
After the power plug is disconnected, the power
indicator may remain lit for a while. This is not a
malfunction.
●
Press the <Main Power On / Off button> (
unit to turn the unit off, when the power of the unit is
turned on or in standby mode.
■
When the Unit is turned on for the first time
Following screen will be displayed.
Select the language with
<ENTER>.
OSD language
English (UK)
Deutsch
Français
Italiano
Español
ENGLISH (US)
Русский
Note
●
Once the item is set, this screen won't be displayed
when switching on the unit next time.
Use the following menu to configure the setting again.
[OSD language]
After [OSD language] is set, the following screen is
displayed.
22
English
Configure the network account setting
as necessary.
Administrator account settings
Password policy
User name
Password
),
Please change the user name and password.If not change,
could not use the Web Control function and for communication
control via a LAN (including Panasonic application software).
Password policy
Cautions regarding the password setting in this item are
displayed on another window.
Password policy
·Reusing passwords is not recommended.
·Password cannot be blank.
·A password consisting of at least eight half-width characters and contaning
characters of at least three of the following four types is recommended.
) on the
·Uppercase letters
·Lowercase letters
·Digits
·Symbols (˜!@#$%^&*()_+\¦}{][<>.,/?`)
User name
A keyboard for user name setting is displayed. Enter the
and press
user name.
Password
A keyboard for password setting is displayed. After
the password is entered, select [Ok] to display a
confirmation screen. Enter the password again and
select [Ok] to determine the password.
Save
The user name and password set above are saved in
the display unit.
Skip
Exits this screen without configuring this setting.
Note
●
Once set or skipped, this screen won't be displayed
when switching on the unit next time. Use the
following menu to configure the setting again.
[Network settings]
dispadmin
Save
Skip
Advertisement
Table of Contents
