Advertisement
•
One of the following versions of Microsoft® Windows®:
•
Windows 7 with Service Pack 1 (32-bit or 64-bit)
•
Windows 8.1 (32-bit or 64-bit)
•
Windows 10 (32-bit or 64-bit)
•
For running the code samples:
•
CTK
i.
Microsoft® Visual C++ 2010 SP1 Redistributable Package (x86) (vcredist_x86.exe) available here:
SoundDesignerSDK/redistribution/MS VC++ 2010 Redist (x86). The installation of this
redistributable is required for CTK.
ii. CTK installer: SoundDesignerSDK/redistribution/CTK
•
Microsoft Visual C++ 2015 Redistributable Update 2 for 32-bit operating systems (vc_redist.x86.exe),
available here: SoundDesignerSDK/redistribution/MS VC++ 2015 Redist (x86). Installation of this
package is required for the SDK.
•
The prerequisites listed in the README files contained in the individual code samples' sub-directories.
For example, to run the C# sample you need the Dot Net Core runtime (as indicated in the README file of
that sample), in addition to the Visual Studio 2015 C++ redistributable.
To download Sound Designer Software, you require a MyON login account. If you do not have a MyON account,
please contact your local ON Semiconductor sales representative.
To download the Sound Designer Software package, log into your MyON account and select the Software
hyperlink from the main Ezairo 7111
Designer and SDK to download the main .ZIP file. Unzip the file contents to a local directory and then follow the
instructions below.
3.2 Installation Instructions
To install Sound Designer Software, follow these steps:
1.
Double-click sounddesigner_setup.exe. Follow the prompts for installing the software on your computer.
When installation is complete, the Sound Designer Software can be launched from the Start menu under ON
Semiconductor > Sound Designer > Sound Designer.
2.
Select the appropriate programming box installation procedure from the following list:
a.
If you are using a DSP3 (from manufacturer ON Semiconductor), install the DSP3 Programmer driver
version 2.1.71 (included in redistribution/DSP3).
b.
If you are using a HI-PRO (from manufacturer Otometrics), install the latest HI-PRO driver (currently
version 4.02) from Otometrics®; add the following to your system path (found in the environment
variables) to complete the HI-PRO programmer installation.
C:\Program Files (x86)\HI-PRO;
c.
If you are using a Promira™ Serial Platform (from manufacturer Total Phase), ensure that you are running
firmware version 1.35 or later. Ensure also that your Promira is registered in the Device Manager under
Network Devices, not under Other Devices. It might appear as Remote NDIS Compatible Device.
When you plug in the Promira Serial Platform for the first time on a particular USB port, you need to wait
for about two minutes to allow it to register before using Sound Designer Software. During registration,
the blue light comes on, which normally indicates that the device is ready for use; however, if the
registration is incomplete, Sound Designer Software cannot use Promira. See the Promira Serial Platform
System User Manual from TotalPhase™ for more information.
ON Semiconductor Confidential
landing
page. From the pop-up menu, select E7111_V1 Firmware, Sound
www.onsemi.com
7
ON Semiconductor
Advertisement
