Advertisement
2.
Start Sound Designer Software by clicking on the Sound Designer link under the ON Semiconductor tab on
the Windows Start menu.
3.
When the Select a Workspace dialog box appears, you need to choose a workspace to for Sound Designer
Software. For new installations, we highly recommend selecting an empty directory for the workspace. Errors
might occur if opening a workspace created using an earlier version of the Sound Designer Software
Application. To create a workspace, click Browse and the software allows you to create one. If you click
Browse and select a pre-existing directory for your workspace, make sure it is empty. To begin working with
the Ezairo 7111, check Import Sample Workspace, and select E7111 from the drop-down list. Click OK.
(See Figure 7 on page 11
Figure 7. Selecting a Workspace
IMPORTANT: If you experience problems, such as an error opening a map file, when you use a workspace that
has been created for an older version of Sound Designer Software, try creating a new workspace.
4.
Optionally, open the console window by clicking the Show Console icon (shown in Figure 8, below). The
console window displays error and status messages accumulated in this session. We recommend having the
console viewable at all times while using Sound Designer Software, to get immediate status information.
ON Semiconductor Confidential
www.onsemi.com
11
ON Semiconductor
Advertisement
