Ec Declaration And Conformity - Lambda Labs KW-18 Manual

Lambda Labs - Professional Acoustics

1.3. EC declaration and conformity

-
-
-
-
-
The unit must be grounded to the PE of the Power Network thru the Power connectors! In the case of an Off-Grid
use, a proper grounding network must be provided to the PE pins of the Power input connectors of the unit! PE
impedance should be always kept low! The use of a GFCI unit is recommended! In the case of single phase power
line application, use a common single phase GFCI! In the case of three phase power line application, use a single
3-phase GFCI! Special local electrical safety compliance regulation may apply!
Electrical and electronic devices must be disposed of separately from household or municipal waste at the end of its operational
lifetime. Please dispose of this product according to the respective national regulations or contractual agreements. If there are any
further questions regarding the disposal of this product, please contact Lambda Labs.
www.lambda-labs.com
Declares that the following product:
Is in conformity with the provisions of EMC standards and product category:
EN 55032:2012 with EN 55032:2012 AC 2013
Special local EMC compliance regulation may apply!
WEEE Declaration (Disposal)
Lambda Labs
Austria
KW-18
Emission:
EN 61000-3-2:2014
EN 61000-3-3:2013
FCC Part 15 Sub B
Immunity:
EN55103-2:2009
Product Category:
EN55103 E-2
SAFETY COMPLIANCE:
Safety Class I
! 6
Graz, 17/02/2020
Steffen Kroschel, Chief Technology Officer (CTO)
KW-18 Amplifier Manual