Table of Contents
Advertisement
Lambda Labs - Professional Acoustics
8.1. Cleaning
Keep your KW-18 units clean and dry! Cleaning should be performed regularly using dry or slightly wet cloth! After removing
the dust filters, you might use clean (oil and liquid free) high pressure air to remove dust from the inside. Never use air with a
too high pressure for the cleaning! Lambda Labs recommends air pressure of 2-4 Bar.
Danger: Always disconnect the KW-18 from power before you perform maintenance!
[
DANGER!
Danger: Do not switch on or even connect the KW-18 to the power until it is not completely dry!
[
DANGER!
Attention: Neutrik PowerCON is a connector without breaking capacity, therefore the PowerCON
should not be connected or disconnected under load or live!
[
ATTENTION!
9. Dimensions
www.lambda-labs.com
Dimensions (mm)
483
444
! 2 2
KW-18 Amplifier Manual
Weight
18 kg
/
39,7 lbs
Advertisement
Table of Contents
