Table of Contents
Advertisement
Lambda Labs - Professional Acoustics
[
DANGER!
[
CAUTION!
[
CAUTION!
[
CAUTION!
[
CAUTION!
[
CAUTION!
[
ATTENTION!
!
ATTENTION!
[
www.lambda-labs.com
Manual!
Keep this manual within reach while operating the product/s all the time!
As a Lambda Labs products rental partner, always attach the appropriate user manuals to
the devices. Should
you need further manuals, please order them from Lambda Labs or
download a current version!
If you resell the system, hand over the manual to the next operator and provide written
records about any changes of the system which may have been applied! Check our website
regularly for updates in order to use always and only the latest manual version!
Cables!
Use only high-quality commercially-available speaker cables. All installations or
modification should be performed by qualified personnel.
Cabling!
Lay down all cables with care. Protect the power cord from being walked on or pinched,
particularly at plugs/receptacles and the point where they exit from the device.
Additionally, secure the cables with duct tape or cable bridges and mark them for safety
reasons. Do not place anything on the cables of the device!
Setup environment!
Keep the device dry and avoid the contact to heavy dust, salt, sand and prolonged
exposure to intense sunlight or strong vibrations and impact.
Placement & interaction with other devices!
The device should not be placed near any heat producing sources or exposed to high
temperatures (above 40 degrees Celcius) or temperatures below zero degrees Celcius.
Unplug this device during lightning storms or when unused for long periods of time!
Sufficient ventilation should be provided when operating the amplifier! Do not block any
ventilation openings. Install in accordance with the manufacturer's instructions!
Storing!
Store the device in a dry, cool and clean environment!
Neutrik PowerCON!
Neutrik PowerCON is a connector without breaking capacity, therefore the powerCON
should not be connected or disconnected under load or live!
Neutrik SpeakON!
Neutrik SpeakON is a connector without breaking capacity, therefore the SpeakON should
not be connected or disconnected under load or live!
Shipping
Keep the packaging of the device in order to send it in original packaging in case of a
fault. This minimizes the risk of possible transport damage.
! 5
KW-18 Amplifier Manual
Advertisement
Table of Contents
