Remove The Camera; Remove The E Ink Board And The E Ink Cable - Lenovo ThinkBook Plus Hardware Maintenance Manual

Go to
https://support.lenovo.com/partslookup
replacement part:
Microphone board (with camera cable)

Remove the camera

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD panel" on page 43
Step 1. Disconnect the camera cable from the camera and then remove the camera.
Figure 40. Remove the camera
Go to
https://support.lenovo.com/partslookup
replacement part:
Camera

Remove the E Ink board and the E Ink cable

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD panel" on page 43
Step 1. Remove five screws and then remove the right hinge.
Step 2. Peel off the mylar.
Figure 41. Peel off the mylar
Step 3. Disconnect cables connected to the E Ink board. Remove the E Ink cable and the E Ink board.
48
Hardware Maintenance Manual
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following