Operation; Intended Use; Before First Use - Beko STM 4116 B User Manual

2 Operation

2.1 Intended use

This appliance is intended only for household use, removing the creases on your clothes and
for various textile products including curtains; it is not suitable for professional use.

2.2 Before first use

• Remove any sticker or protective cover from the steam head.
• Unwind and straighten the cord before use.
• When operating the garment steamer for the first time, allow it to steam for a few minutes.
this will remove any impurities and odours that might have been left by the manufacturing
process.
• When operating the garment steamer for the first time, you may want to try the steamer
on an old piece of fabric before steaming your garment.
A
WARNING: To avoid an electrical circuit overload, it is recommended
that no other appliances are plugged into the same circuit as your garment
steamer when it is in use.
C
When unpacking the garment steamer, check to see you have received all
the items listed in the parts list, before discarding the packaging.
2.3 Assembling/operating your garment steamer
• Do not exceed the MAXIMUM level when filling the water tank.
• Press the power button (6), the display screen icons will blink for once,
and then only the steam level icon will blink indicating that the device is
heating up. Allow the device to preheat before use. The device is ready for
C
use when the steam icon is lit continuously.
• You may switch between steam levels by pressing the power button (6).
• The garment steamer has an intelligent automatic power off function.
When the user stops operating this product for more than 8 minutes of
time, the internal control circuit will cut off power supply, and the product
will enter standby mode to ensure safety and to save energy. At the same
time, the "auto shut off indicator" blinks.
Garment Steamer / User Manual
13 / EN