pro-emit DIY-M-KIT 200W Quad Assembly Instructions Manual page 7

8
Insert LED connection cable
red (10) in the + pole of the
IDEAL LED array holder (C).
C
10
C
8
Insert LED connection cable
blue (8) in the - pole of the
IDEAL LED array holder (C).
Cut the red and black cable (9 + 10) to the correct
length and strip 6-8mm at both ends.
Cut the blue LED connection cable (8) to the correct
length and strip 6-8mm at both ends.
Insert LED connection cable
black (9) in the - pole of the
IDEAL LED array holder (C).
C
9
C
Insert LED connection cable
blue (8) in the + pole of the
IDEAL LED array holder (C).
8
Page 7