Advertisement
Quick Links
Advertisement
Related Manuals for pro-emit DIY-M-KIT 200W Quad
Summary of Contents for pro-emit DIY-M-KIT 200W Quad
- Page 1 ® Assembly instructions DIY-M-KIT 200W Quad...
-
Page 2: Parts List
Parts list DIY-M-Kit 200W Quad egraf Graphit M3 Allen key screw Thermal conductive pad M4 nut Cree CXB 3500 CD 3500K (4x replacement) 3 Step (N0HCD35G) M4 washer (4x replacement) IDEAL LED Array Holder 50-2303CR M4 Allen key screw (4x replacement) - Page 3 Assemble the MeanWell HLG 185H (I) driver to the connection angle bracket(G) with M4 Allen key screw (4), M4 washer(3) and M4 nut (2). Screw the connection angle bracket and holder (F) to the heatsink (H) by use of M6 Allen key (6).
- Page 4 Screw the holder (F) and brackets (G) to the heatsink (H) using M6 Allen screws (6). Insert the Cree CXB 3590 (B) in the IDEAL LED Array Holder (C) and carefully stick the thermal conductive pad (A). Carefully While insert of Cree CXB 3590 Attention: remove thermal con- + pole on the IDEAL...
- Page 5 (Caution: do not use overstress the screws - risk of breakage!) Fix the IDEAL LED Array Holder with Cree CXB 3590 (A + B + C) to the heatsink (H) with Allen key Screws (1). Please position the + pole of IDEAL LED Array Holder as shown in the picture. (Caution: do not use overstress the screws - risk of breakage!) Assemble IDEAL Reflector adapter (D) to IDEAL LED Array Holder (C) by using M3 Allen key screws (1).
- Page 6 Danger: Risk of electric shock! The electric connection must be done by a qualified electric expert Caution: The power plug must be not plugged in during assembly! Open a Wago terminal (7) lever and connect the black LED connection cable (9) and the black (a) LED driver cable.
- Page 7 Cut the red and black cable (9 + 10) to the correct length and strip 6-8mm at both ends. Insert LED connection cable Insert LED connection cable red (10) in the + pole of the black (9) in the - pole of the IDEAL LED array holder (C).
- Page 8 Plug the Ledil Angelina reflector (E) to the IDEAL Reflector Adapters (D) and lock them by slight twisting. Your DIY-M-Kit 200W quad is now ready for use! Page 8...