Advertisement
3
Screw the holder (F) and brackets (G) to the heatsink (H) using M6 Allen screws (6).
4
Insert the Cree CXB 3590 (B) in the IDEAL LED Array Holder (C) and carefully stick the thermal
conductive pad (A).
4.1
B
C
While insert of Cree CXB 3590
(B) into the IDEAL LED Array
Holder (C), slightly push back
holders pin back to insert and
clamp the Cree CXB 3590.
Caution:
4.2
Attention:
+ pole on the IDEAL
LED Array Holder (C) and + pole
on the Cree CXB 3590 (B) must
match!
If the pad sticks, it cannot be removed without damage!
G
H
4.3
B
C
Carefully
ductive pad (A) from paper and
stick the adhesive side on the
backside of clamped Cree CXB
3590 (B + C).
The thermal pad must be in line
with the Cree CXB 3590 on all
sides.
6
F
A
B C
remove thermal con-
Page 4
Advertisement
