Advertisement
7
The electric connection must be done by a qualified electric expert
K
11
Open the cable sleeve (K) and insert the stripped power cable (11) and the stripped driver cable (c)
as shown in the picture.
The thin rubber cord must be pierced and the cable passed through. The hole for the cable must
not become too big, as the rubber will seal on the cable. Connect the three wires of the two cables
with the
correct/same color
cable sleeve back together and ensure that the cables are securely anchored.
Danger: Risk of electric shock!
Caution: The power plug must be not plugged in during
Open a Wago terminal (7) lever and connect the
black LED connection cable (9) and the black (a) LED
driver cable.
Open another Wago terminal (7) lever and connect
the red LED connection cable (10) to the red (b) LED
driver cable.
g
d
through the bridge (g) and tighten them with the screws. Screw the
assembly!
c
f
e
7
a
9
b
7
10
K
Page 6
Advertisement
