User Absent; Dedicated Calls - Motorola PTX760 Manual

6 After the call is set-up, press PTT button and
talk with your mouth 2.5-5 cm from micro-
phone. Release PTT to listen.
7
When finished with call.
8 CLEAR BUTTON or
*#
Tone A sounds
If a contact list number is selected but no call
request is sent, the display is held until tone H
sounds and then reverts to the IDLE STATE.
When the number is displayed it may be edited
as described in the Keypad Edit section.

User Absent

User Absent is a network feature which may be
enabled in your radio. With this feature
enabled, entry into the user absent mode is
automatic and any calls received when you are
away from your radio will be put into the
Missed Calls list automatically and the
message "Will call back" sent to the caller.
When you return to your radio, check whether
tone G sounds every 10 seconds which
indicates that your radio is in user absent
mode. Press any button to exit user absent
mode and return the radio to the idle state for
normal operation.

Dedicated Calls

Dedicated calls can be made from either a
preprogrammed dedicated call button or using
Call Ended
the speed-dial feature from the keypad.
Press the Dedicated Call button to make a call
to the most commonly used pre- programmed
number. The display will show "Calling".
To use the speed-dial feature, hold down one
of the keypad keys (0 to 9) for a preset period
to make a call to one of ten (1 of 10)
preprogrammed numbers which are the first
ten entries (1 to 9, 0= 10) in the contact list.
The selected number and alias will be
displayed and the conversation can go ahead.
Radio Calls
15
English