Hydraulic Box Rack; Programming Additional Remotes - piER plEASURE HYDRAULIC BOAT LIFT Owner's Manual & Assembly Manual

Solar Panel & Solar Panel Rod (Optional)
The solar panel is available to charge the battery used for the
hydraulic system. The solar panel rod is available to attach the
solar panel from the canopy frame.
The solar panel will perform the best if placed at a 45 degree
angle and facing direct south. If the charger does not keep the
battery charged, adjust the angle and direction for maximum
exposure to sunlight. The rod will allow the panel to be rotated
in any direction.
Hydraulic Box Rack (Optional)
The hydraulic box rack is available for storage of the hydraulic
system off the dock. The rack is available to mount to the Pier
Pleasure dock system or any post style dock.
Programming Additional Remotes (Optional)
You may purchase additional hydraulic pump remotes from the dealer.
You will need to program the remote to work with your system. First,
you will need to locate the receiver inside the black poly box. On the
end of the receiver is two little buttons labeled mode switch #1 & #2.
To program the remote:
1. Hold button mode switch #1 on receiver for 3 seconds. Green light
will flash fast.
2. Within 15 seconds, aim remote at receiver and push remote
button labeled ( I ).
3. Hold button mode switch #2 on receiver for 3 seconds. Red light
will flash fast.
4. Within 15 seconds, aim remote at receiver and push remote
button labeled ( II ).
5. If remote will not work properly, repeat steps 1-4 again.
- 8 -
Receiver
Antenna
Wire