Table of Contents
Advertisement
3.7
Security
Set User/Administrator Password
Here you can setup an Administrator Password and a User Password. An Administrator
Password must be set before you can set a User Password. The password will be
required during boot up, or when the User enters the Setup utility. Note: A User
Password does not provide access to many of the features in the Setup utility.
To set a password, select the password you wish to set and press Enter. Type the
password into the dialog box that appears. Password length must be between 3 and 20
numbers and/or letters. Press enter and re-type the password into the dialog box. Press
Enter again to confirm. The password is now set.
Chapter 3 – AMI BIOS Setup
72
Advertisement
Table of Contents
