Cleaning - Legamaster ETX Series User Manual

SAFETY INSTRUCTIONS
Don't use any kind of liquid on the e-screen.
• If liquid is spilled on the e-screen, remove
the power plug from the wall socket and ask
qualified service personnel to check the product.
• If liquid gets on e-screens glass plate, clean it
with a dry and soft cloth immediately.
• Don't use any chemicals on the e-screen.
• If metal or liquids get into the e-screen, it may
cause a fire or an electrical shock.
Don't install or remove the power plug with
wet hands.
This may cause an electrical shock.
If the e-screen will not be used for a long
period of time, unplug the display.
Preventing to do so may cause premature wear of
electrical components or fire.

2.6. CLEANING

Remove the power plug from the power
outlet before cleaning.
Failure to do so may result in electrical shock or
damage.
Cleaning the surface of the e-screen
• When the surface of the e-screen becomes dirty,
wipe the surface lightly with a soft clean cloth.
• If the surface requires additional cleaning, lightly
moisten the cloth.
8
ETX-SERIES – USER MANUAL – ENGLISH
Handle the e-screen with care, prevent glass
breakage.
• If the glass of the e-screen is broken, liquids may
escape. Please don't touch the liquid.
• If these liquids come into contact with skin or eyes,
immediately wash it away with clean water and
consult a medical professional.
Precautions with the remote control batteries
• Please only use approved AAA type batteries.
• Please be sure to insert batteries by matching the +
and -.
• Don't recharge, heat, disassemble, short or throw
batteries into a fire.
• Don't mix a new battery with a used one.
• Don't mix different types of batteries together (only
use the specified type).
• Do not to let any kind of liquid enter the e-screen as
it may cause electrical shock or damage.
• Do not clean the e-screen with alcohol, solvents or
ammonia, as this could damage the e-screen.