Float Menu; Settings Menu - Legamaster ETX Series User Manual

5.3. FLOAT MENU

Un menú flotante aparece cuando se pasa por el borde
inferior de la pantalla.

5.4. SETTINGS MENU

A continuación puede encontrar un resumen completo del menú de ajustes de la pantalla electrónica del ETX-
XX20, junto con una explicación_x000D_ de los ajustes._x000D_
MAIN SETTINGS SETTING
CATEGORY CATEGORY
Ethernet
NETWORK &
Wi-Fi
CONNECTED
DEVICES
Portable
hotspot
Bluetooth
DEVICE Picture
LEVEL1 LEVEL2
MAC address
IP address
Ethernet
MAC address
IP address
Wi-Fi
Hotspot
Setup Wi-Fi hotspot
MAC address
Blooth
Picture mode
Power mode
Color tempreture
Eye protect
Anti blue light
Backlight
FUNCIONAMIENTO
En este menú flotante, se pueden encontrar
3 botones de acción con la siguiente
funcionalidad:
Back: te lleva de vuelta a la pantalla
anterior
Home: te lleva de vuelta a la pantalla
principal del Lanzador de Legamaster
Resumen: Muestra todas las aplicaciones
abiertas y permite a los usuarios cambiar
rápidamente entre ellas, o cerrar todas las
aplicaciones abiertas a la vez.
VALUES
shows the MAC address for the wired connection
shows the IP address for the wired connection
Toggle ethernet-connection on / off for the screen itself.
ON/OFF
Disabling this does not disable ethernet for the OPS
shows the MAC address for the Wi-Fi connection
shows the IP address for the Wi-Fi connection
ON/OFF Toggle Wi-Fi on and off
ON/OFF Toggle the hotspot-functionality on / off
Set-up the hotspot
show the MAC address for the bluetooth adapter
Toggle bluetooth on/ off, show / connect with available
ON/OFF
devices
Standard
Dynamic Select pre-set picture modes
Soft
Picture mode where settings can be adjusted manually in
User
‚Advanced'
User
Choose a power-mode: User = manual brightness
Auto
setting, Auto = Automatic brightness setting based on
Balanced ambient light conditions, balanced = brightness 75, ECO
= brightness 50, DCR = 100. Power consumption varies
ECO Friendly
based on these settings.
DCR
Standard
Cool Select a color temperature mode
Warm
Toggle Eye Protect mode on / off. When enabled, the
ON/OFF
brightness will be reduced when writing.
Toggle Anti blue light on / off. When enabled the amount
ON/OFF
of blue light will be reduced.
Manually adjust the brightness. Using this setting will
0-100
change the power mode setting to ‚Manual'
ETX-SERIES – MANUAL DE USUARIO – ESPAÑOL
EXPLANATION
127