Pixel TC-252 Product Manual

Pixel TC-252 Product Manual

Timer remote control

Advertisement

Timer Remote Control
有线定时快门线
TC-252
42150001 V10.01

Advertisement

Table of Contents
loading

Summary of Contents for Pixel TC-252

  • Page 1 Timer Remote Control 有线定时快门线 TC-252 42150001 V10.01...
  • Page 2: Table Of Contents

    Continuous shooting within one second ]shooting Delay shooting Timing plan for shooting PIXEL TC-252 Specifications This manual is current update of 1st Sep, 2009. Please contact to PIXEL distributor for further information, if interesting of the combining usage with products released after this day.
  • Page 3: Overview

    The batteries should not install anti-polarity; Otherwise the batteries may leak corrosive liquids, heat or explosion. First of all, thank you for purchasing product of PIXEL. TC-252 is a high Make sure the camera and TC-252 are powered off before install it.
  • Page 4: Tc-252 Introduction

    Please check all included items after open the packing, if missing, please Right move button contact to dealer. Increment button 1. Timer remote control TC-252 -------1pc 2. Shutter connect cable ----- 1pc Timing plan start/stop button 3. AAA battery ---------------------------- 2pcs 4、Manual(this manual) ------ 1pc...
  • Page 5: The Name Of Each Part 0

    The name of each part Preparation for installation and use Before use, you should read the user manual of your camera carefully; DC1 DC2 understand the manipulation and functional setting. The function setting of Display camera may influence the efficiency control of the camera. 1 1 1 2 1 3 Install and replace the battery The low battery voltage icon[...
  • Page 6: Connection With The Camera

    3. Insert the input plug of shutter connect cable into the control signal output socket of TC-252. The timer remote control will not able to control the camera if the shutter connect cable hasn't insert correctly.
  • Page 7: Shooting Control

    Shooting control Shooting control Sketch map for selecting function mode: Part of the cameras can' t support to wake up the external shutter, it' s unable to wake up the external shutter and take photo when the camera is dormant. Press Press Press...
  • Page 8: ]Shooting 1

    When the camera function is set to be[ ], the camera will execute delay shooting. Continuous shooting within one second is one patent function which issued by Pixel ]shooting limited Enterprise, it'll support spacing continuous shooting within one second and never change the single shot mode of the camera.
  • Page 9: Delay Shooting

    ], set the delay time reduced. It can be set between 1 to 59 seconds. The delay shooting function of TC-252 can user-defined the delay time and shots. 5. After set up the new parameters, press the set button, save and exit settings.
  • Page 10: Timing Plan For Shooting 1

    Shooting control Shooting control Operate the delay shooting When the camera function is set to be [ ], the camera will perform one or more delay shooting. 1. Press the left button[ ]or right button[ ], move the When the camera lens focus function is set to be [ M ],the camera will not execute focusing activity icon to the delay shooting icon[ action if half-press the release button of the view receiver.
  • Page 11 Shooting control Shooting control “ delay time , interval time , shots number as the sketch map. ” “ ” “ ” Press Press Press Press Exposu shot number time Press Press Press Press Delay Interval timing timing Press Press Press Press time...
  • Page 12 Shooting control Shooting control 3. By pressing button[ ]or[ ],enter into the setting for minutes and hours , “ ” “ ” 2. Press the set button, entering to set the number plan to shot. Press button ]setting shot number can be increased, press button [ ], settings shot “delay time”, “exposure time”,“shots number”...
  • Page 13 Shooting control Shooting control The following examples illustrate the timing plan running: delay time[ ] = 5 Press Press Press Press Press Delay seconds, exposure time[ ] = 1 second, shooting interval[ ]= 6 seconds, Singl e shoot shoot -ing -i ng shooting number[ ] = 3.
  • Page 14: Pixel Tc-252 Specifications 2

    PIXEL TC-252 Specifications Standby time: More than 3 years Using battery: 1.5V×2AAA Dimensions(W×H×D):149mm×49.5mm×24mm Weight(with batteries):70.5g Now you can start to use unique high-performance PIXEL product TC-252. If you have any questions, you can contact the local distributor. Or visit the website http://www.pixelhk.com.

Table of Contents