Page 1
Wired Live View Remote Control This manual is current update of 1st August, 2010. Please contact to PIXEL service center for further LV-122 information, if interesting of the combining usage with products released after this day. 中文 Made in China PIXEL .INC...
Contents Overview Cautions before use LV-122 features Included items LV-122 the name of each part How to use LV-122 Install battery Connecting Device Use LV-122 Live View Shooting Device charge PIXEL LV-122 Specifications...
Overview Cautions before use Make sure the camera and LV-122 are powered off before install device. First of all, thank you for purchasing the high-performance PIXEL product LV- As this is an electronic product accessory; some of the environment causes may affect the 122, which can monitor the scope of camera lens by wired real-time control, Which working.
LV-122 features Included items LV-122 getting the image from lens, we guarantee the shooting range and result Please check all included items after open the packing, and PIXEL LV-122 same as the camera. with the following items: Real-time monitor the scenes captured by camera lens.
Page 5
The name of each part The name of each part Function icon, indicator and button Icon for single shoot Icon for 1st continuous shoot Icon for [ ] shoot Icon for delay shoot Indicator for single shoot Indicator for continuous shoot every second Indicator for [ ] shoot Indicator for delay shoot...
The name of each part How to use LV-122 Install battery 1. Press the lock release button on the end of battery hatch, and Shutter plug slide battery hatch to open it. 2. Install the battery in place according to the figure.
Slide Power switch to [ON] to turn on wired Live view remote plug protective cover and put the shutter plug of connecting cable CL- control (LV-122) and to [OFF] to turn off it. 17 in place, then make sure it has been fixed firmly.
How to use LV-122 Live View 1. Open the Live View mode on camera. Adjust L brightness When you want to real-time monitor, you have to turn on the monitoring function(Lv)of camera. After turn on the LCD, it default to be darkest brightness.
Shooting Shooting By left [ ] or right [ ] movingorto set shooting mode, the shooting mode is as following: Make sure set the camera function to be [ single shooting, continuous shooting per second, [ ] shooting and delay shooting. When the camera function is set to be [ ], may continuous shooting.
Page 10
Shooting Shooting shooting 3. Full press then hold the shutter release button, the shutter indicate light on red color as each second. The camera keep 1. When the wired live view remote control is on, by left or right shooting once as each second until fully release the shutter moving [ ] or [ ] to make the indicator of [...
Page 11
Shooting Shooting Make sure set the camera function to be [ 3. Full press the shutter release button, the shutter indicate light When the camera function is set to be [ ], the camera only shoot one time but not [ flash the red color as 8 times.
Shooting Device charge When the battery power of device is low, the indicator (the power indicator of the view When shooting should pay attention to the following item: transmitter or the charge indicator of the view receiver) will flash red, you should replace When the camera lens focus function is set to be [ MF ],the camera will not battery or recharge.
Connecting cable length : 3000mm Dimensions: 102mm ×61mm×19mm Weight: 76.5g ( with battery ) Now you can start to use unique high-performance PIXEL product LV-122.If you have any questions, you can contact the local distributor. Or visit the website http://www.pixelhk.com.