Table of Contents General Safety Instructions for All Semak Products ............. 4 Safety Instructions ......................5 Operating Instructions for the Semak Hand Dryer ............6 Cleaning Instructions for the Semak Hand Dryer ............6 Installation & Mounting Instruction ................7 Wiring Diagram ......................
Page 3
RETAIN THESE SAFETY INSTRUCTIONS Page | 3...
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in anyway. Return to Semak or an authorised service agent for repair. CAUTION Hot Surfaces. NEVER leave the appliance ON unattended. ALWAYS unplug after use.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, is dropped or damaged in any way. Return the appliance to Semak Australia (Manufacturer) or its Authorised Service Agent for repair. Do not attempt to repair the machine.
Operating Instructions for the Semak Hand Dryer The Semak Hand Dryer is electronically operated for Health and Hygiene purposes 1. Before connecting to electrical outlet, visually inspect the cord and plug for faults. 2. Ensure that the Hand Dryer’s power supply is also switched off before connecting to the electrical outlet.
Installation & Mounting Instruction These units are to be surface mounted and may be subject to Australian Building Code Regulations or architectural drawings for height location and fitment, for able bodied and/or disabled use as may be applicable, which is the responsibility of the installation contractor to ensure compliance re fitment.
Parts Diagram Parts Listing 1 Air inlet guard 2 Fix screw 3 Fan blower 4 Fan enclosure B 5 Thermostat 6 Motor mount 7 Motor rubber 8 Motor 9 Timer assembly 10 Fix shaft spring 11 L Key 12 Enclosure 13 Plate 14 Air outlet 15 Fan enclosure A...
Specifications Model MC006 Dimensions 284mm W x 247mm H x 213mm D (35mm Nozzle Projection) Power 240 Volts, 50 Hz Electrical 2400 Watts / 10 amp Sound 75 decibels Warranty 12 Months Commercial Parts & Labour Casing: White Porcelain Enamel Coated Steel / Nozzle – Satin Chrome Plated with Fixed or 360⁰...
CISPR 14 Warranty The Semak Hand Dryer is a Commercial appliance. This product is guaranteed for 1 Years* from the date of purchase against mechanical and electrical defects. If the fault is deemed caused by MISUSE/ABUSE the terms of the warranty are invalidated.
Page 11
Failure to do this will void product warranty. 5. Cost of transport of any appliance or part to and from SEMAK or its Service Agent is to be paid by the owner. 6. A charge will be made where failure is due to neglect, abuse or accidental damage on the part of the operator, or when no fault can be found or the fault is due to causes outside the control of Semak Australia.
WARRANTY REGISTRATION Retain for Future Reference DO NOT SEND Please complete one registration for each Semak appliance. You may be required to provide this information when requesting after sales service. Please staple your proof of purchase to this page. Company Name: ________________________________________________...