Table of Contents General Safety Instructions for All Semak Products ..........4 Safety Instructions ....................5 Operating Instructions for the Semak Hand Dryer ..........6 Cleaning Instructions for the Semak Hand Dryer ..........6 Mounting Instruction ................... 7 Connection Diagram & Parts List ................. 8 Specifications .......................
Page 3
RETAIN THESE SAFETY INSTRUCTIONS Page | 3...
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in anyway. Return to Semak or an authorised service agent for repair. CAUTION Hot Surfaces. NEVER leave the appliance ON unattended.
Safety Instructions Ensure that the power supply is also switched off before connecting to the electric outlet. Use only on AC 220-240V 50 Hz only. To avoid risk of electric shock, do not immerse cord, plug or motor end of the appliance in water or any other liquid.
Operating Instructions for the Semak Hand Dryer The Semak Hand Dryer is electronically operated for Health and Hygiene purposes 1. Before connecting to electrical outlet, visually inspect the cord and plug for faults. 2. Ensure that the Hand Dryer’s push power supply is also switched off before connecting to the electrical outlet.
Specifications Model MC007 Dimensions 220 x 240 x 160 mm Power 240 Volts, 50 Hz Electrical 1800 Watts / 10 amp Warranty 12 Months Connection Description Secure the base plate on the wall provided. The conduit in place by suitable ½ inch trade conduit fitting.
CISPR 14 Warranty The Semak Hand Dryer is a Commercial appliance. This product is guaranteed for 1 Years* from the date of purchase against mechanical and electrical defects. If the fault is deemed caused by MISUSE/ABUSE the terms of the warranty are invalidated.
Page 11
Failure to do this will void product warranty. 5. Cost of transport of any appliance or part to and from SEMAK or its Service Agent is to be paid by the owner. 6. A charge will be made where failure is due to neglect, abuse or accidental damage on the part of the operator, or when no fault can be found or the fault is due to causes outside the control of Semak Australia.
WARRANTY REGISTRATION Retain for Future Reference DO NOT SEND Please complete one registration for each Semak appliance. You may be required to provide this information when requesting after sales service. Please staple your proof of purchase to this page. Company Name: ________________________________________________...
Need help?
Do you have a question about the MC007 and is the answer not in the manual?
Questions and answers