Table of Contents General Safety Instructions for All Semak Products ..........4 Safety Instructions ....................5 Installation Instructions for the Semak Hand Dryer ..........6 Operating Instructions for the Semak Hand Dryer ..........7 Cleaning Instructions for the Semak Hand Dryer ..........8 Specifications .......................
Page 3
RETAIN THESE SAFETY INSTRUCTIONS Page | 3...
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in anyway. Return to Semak or an authorised service agent for repair. CAUTION Hot Surfaces. Page | 4...
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, is dropped or damaged in any way. Return the appliance to SEMAK. (Manufacturer) or its Authorised Service Agent for repair. Do not attempt to repair the machine.
Installation Instructions for the Semak Hand Dryer Before installation consider the following points: 1. Do not install in places of excessive condensation, humidity or water build up. 2. Direct installation to mains power must be carried out by a registered electrician.
5. Close the Switch Settings Box with the supplied allen key and retain for future use. The Hand Dryer is now ready for use. The Semak Hand Dryer is electronically operated for Health and Hygiene purposes: 1. Before connecting to electrical outlet, visually inspect the cord and plug for faults.
Cleaning Instructions for the Semak Hand Dryer Always unplug the Hand Dryer from the power source before cleaning. Clean with a damp soft cloth and sanitizer spray if required. Avoid getting water or spray inside the dryer. Weekly Cleaning Draining and Cleaning the Drain Tank...
Specifications Model HD01 Dimensions 330 x 220 x 687 mm Weight 11 Kg Power 220-240 Volts, 50 Hz Electrical 2050 Watts / 10 Amp Warranty 12 Months Connection Description Secure the base plate on the wall provided. The conduit in place by suitable ½ inch trade conduit fitting.
CISPR 14 Warranty The Semak Hand Dryer is a Commercial appliance. This product is guaranteed for 1 Year* from the date of purchase against mechanical and electrical defects. If the fault is deemed caused by MISUSE/ABUSE the terms of the warranty are invalidated. If the product has been opened or tampered with (i.e.
Page 11
Failure to do this will void product warranty. 5. Cost of transport of any appliance or part to and from SEMAK or its Service Agent is to be paid by the owner. 6. A charge will be made where failure is due to neglect, abuse or accidental damage on the part of the operator, or when no fault can be found or the fault is due to causes outside the control of Semak Australia.
WARRANTY REGISTRATION Retain for Future Reference DO NOT SEND Please complete one registration for each Semak appliance. You may be required to provide this information when requesting after sales service. Please staple your proof of purchase to this page. Company Name: ________________________________________________...