Page 2
Realtimes Beijing Technology Co.,LTD www.realtimes.cn/en/index.html Revision History Applicable Revision Date Reason for change hardware version V1.0 2020.2 Initial release V1.0 RTSS-X502N Reference Manual V1.0...
Page 3
Therefore, it is recommended to observe anti-static safety precautions when handling any circuit board component (including RTSS-X502N). Anti- static safety protection measures include, but are not limited to the following:...
3000 sq.m modern manufacture center with advanced equipments which can support mass production in long term. RTSS-X502N is a Feiyun Smart Box based on NVIDIA Jetson ™ TX1 / TX2. It integrates NVIDIA Jetson ™ TX1 module based on the new NVIDIA Maxwell ™ architecture or NVIDIA Jetson ™...
AD / DA module, 4G module, storage module, etc.) interface One Micro HDMI 2.0 (6Gbps,24bpp,4096x2160@60Hz) Size: 132mm×147mm ×61mm Power input: +9V~+19V Temperature: -25 ~+60 /-40 ~+60 Weight:645.5g *CAN bus interface function is not available when used with Jetson TX1 module RTSS-X502N Reference Manual V1.0...
RS-232,1 x microSD, 1 x microSIM, -20 to 60C,CE&CCC certificated RTS-TXX-AC/DC-PS Power Adaptor for X502N, 100-240VAC/12VDC, RTS-TXX-AT01 2.4GHz/5GHz Dual-band antenna of BT&WIFI ME909S-821 miniPCIe LTE 4G module RTSS-502N-cables Cable kits for RTSS-X502N Order online: https://shop340963258.taobao.com https://mall.jd.com/index-824786.html RTSS-X502N Reference Manual V1.0...
Realtimes Beijing Technology Co.,LTD www.realtimes.cn/en/index.html 2 External interface function and location RTSS-X502N FRONT RTSS-X502N BACK RTSS-X502N Reference Manual V1.0...
To enter Recovery mode: a) Turn off the system power supply. b) Use a USB cable to connect the OTG-USB port of the RTSS-X502N and the USB port of the Jetson development host. c) Short-circuit the 3 and 4 pins of the GPIO connector to power the system. Keep the power supply for more than 3 seconds, and then disconnect the 3 and 4 pins of the GPIO connector.
The COM3 ~ 4 serial ports are RS232 signals. The mapping files in the Linux system are ttyTHS1 and ttyTHS3 in the / dev directory. 4.2 GPIO and function button connector GPIO and function button connectors Function RTSS-X502N Reference Manual V1.0...
CAN bus interface function is not available when used with Jetson TX1 module. 4.4 WiFi antenna connector WiFi antenna interface Function AT1 AT2 marking ipex to sma female Type 4.5 4G antenna connector 4G antenna interface Function AT3 AT4 marking RTSS-X502N Reference Manual V1.0...
4.7 Power switch button Power switch Function On/Off marking 4.8 HDMI connector HDMI output interface Function HDMI marking Micro HDMI connector Type 4.9 Ethernet connector Gigabit Ethernet connector Function Ethernet marking Type Pin define Signal Signal RTSS-X502N Reference Manual V1.0...
Pin 1 location: The green frame on the right. 4.10 USB3.0 connector USB3.0 connectors Function USB3.0 marking Hirose: IX61-A-10P Type OTG interface: the green frame on the right. Function The USB2.0 port of this connector can work in OTG mode description for system programming. RTSS-X502N Reference Manual V1.0...
7 Software/BSP Details The RTSS-X502N board works on systems that burn using the official original NVIDIA Linux For Tegra (L4T) ,HDMI, gigabit Ethernet, USB2.0, serial port, GPIO, SD card, I2C bus, fan interface, can be supported. But Mini-PCIe, USB3.0, SPI,fan interface, can't work normally.
The logo and part number on the product have been deleted or removed. f) The product is out of warranty. Special concerns RTSS-X502N Reference Manual V1.0...
Need help?
Do you have a question about the RTSS-X502N and is the answer not in the manual?
Questions and answers