Advertisement
SX5A AS-Interface
Repeater
SX5A-RP1
•
No address setting required
•
An AS-Interface network can be extended up to 300 m.
•
IP65 protection
•
Insulation displacement technology allows easy connection to AS-Interface fl at
cables.
•
Input status of AS-Interface 1 and 2 are displayed with LED indicators.
•
The SX5A-RP1 repeater is used to extend the AS-Interface cable. One repeater
extends the length of network up to 100 m. A maximum of two repeaters can be
used in a network, enabling the construction of a network of up to 300 m.
Models
Input Voltage
Current
Operating Temperature
Storage Temperature
Operating Humidity
Degree of Protection
General
Insulation Resistance
Dielectric Strength
Applicable Wire
Weight
Dimensions
Mounting
Standard
LED Indicators (see Dimensions)
Indicators
Color (when ON)
AS-Interface 1
Green
AS-Interface 2
Green
Dimensions
60
1
2
AS-Interface
Cable 1
AS-Interface
Cable 2
All dimensions in mm.
264
Specifi cations
26.5 to 31.6V DC
60mA (per segment), 120mA (total)
0 to +55°C (no freezing)
–25 to +75°C (no freezing)
30 to 95% RH (no condensation)
IP65
5 MΩ minimum (500V DC megger)
1000V AC, 1 minute
AS-Interface fl at cable
Approx. 170g
60W x 118.5H x 22.5D mm
Screw mounting
CE
Description
Power is supplied to line 1.
Power is supplied to line 2.
Mounting Hole Layout
22
www.idec.com
Communication & Networking
SX5A-RP1
System Setup
AS-Interface
4.5
Master
AS-Interface
Power Supply
39
Segment
Remote I/O
Remote I/O
Repeater
Repeater
AS-Interface
Power Supply
Power Supply
100 m max.
100 m max.
100 m max.
300 m max.
Segment
Remote I/O
AS-Interface
Advertisement
