Table of Contents
Advertisement
Quick Links
Owner's Manual
OmniSmart
Intelligent • Line-Interactive • Industrial Cabinet
Important Safety Instructions
Mounting
Connection
Basic Operation
Storage and Service
Specifications
Copyright © 2003 Tripp Lite. All rights reserved. OmniSmart
500 VA
120V Input/Output UPS System
1111 W. 35th Street Chicago, IL 60609 USA
Customer Support: (773) 869-1234 • www.tripplite.com
RMX
™
™
is a trademark of Tripp Lite.
2
3
4
5
8
8
Advertisement
Table of Contents
Related Manuals for Tripp Lite OmniSmart RMX 500 VA OM500RMX
Summary of Contents for Tripp Lite OmniSmart RMX 500 VA OM500RMX
- Page 1 Connection Basic Operation Storage and Service Specifications 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 • www.tripplite.com Copyright © 2003 Tripp Lite. All rights reserved. OmniSmart ™ 500 VA ™ is a trademark of Tripp Lite.
-
Page 2: Important Safety Instructions
Equipment Connection Warnings • Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life-support device. -
Page 3: Mounting
Mounting Your UPS may be rackmounted in 4- or 2-post racks or on a DIN rail using these suggested mounting procedures. The procedures are for common rack/rail types and may not be appropriate for all con- figurations. User must determine the fitness of hardware and procedures before mounting. Suggested Rackmount Installation Attach mounting ears (A) to the front mounting holes of the UPS (B) using the screws pro-... -
Page 4: Connection
Using the DB9 cable provided, connect a DB9 port on your computer to a DB9 port on your UPS. Install Tripp Lite power protection software. If your UPS features 2 DB9 ports, a second computer with a DB9 port may be... -
Page 5: Basic Operation
Basic Operation Buttons Use the POWER button to switch your UPS between its four modes of operation. OFF: No indicator lights are on. The UPS is completely shut down for storage or shipping. If the UPS is connected to AC power, it will start up in STANDBY mode. - Page 6 Let the UPS charge for twelve hours, then perform a second self-test. If the LOW BATTERY alarm sounds again, contact Tripp Lite for service. It is likely your UPS requires a battery replacement. Tripp Lite offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.).
- Page 7 (see Connection, page 4). Battery Door: All Battery Warnings must be observed (see Important Safety Warnings, page 2). Tripp Lite offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.). Visit Tripp Lite on the Web at www.tripplite.com/support/battery/index.cfm to locate the specific replacement battery for your UPS.
-
Page 8: Storage And Service
Service If returning your UPS for service, contact your local Tripp Lite dealer or distributor. They will refer you to a service center. Please carefully pack the UPS using the ORIGINAL PACKING MATERIAL that came with the unit. Enclose a letter describing the symptoms of the problem.