Mounting Areas; Mounting Considerations; Orientation And Placement - Zonar V4 User Manual And Installation Manual

4/10/2019
1. Find the GPS ID # on the back of the unit labeled "GPSID (S/N) 18xxxxxx."
2. Record the asset (vehicle name) and the GPS being installed—this is important information for Zonar Customer Care
or the Ground Tra ic Control Administrator.

Mounting Areas

Mount onto an interior flat surface that is large enough to accommodate the footprint. Suggested mounting areas
include the following:
Horizontal mount on dashboard under an angled windshield free of metallic obstructions
Overhead compartment mount with a clear non-metallic view of the sky (for example, under a fiberglass roof or
fairing).
Note: Verify placement acceptability with state DOT/law enforcement prior to installation. Enclosed areas require an
external GPS.

Mounting Considerations

Avoid mount areas with di icult access or areas that do not allow for direct diagnostic LED viewing.
Do not mount near other radio equipment such as two-way radios, PA equipment and high energy electrical sources
(e.g., cables, relays, amplifiers, etc.).
Avoid dirty, dusty, or damp mount areas (for example, near floors and entry ways).
To prevent water damage, do not install below windows or doors that open to the vehicle's exterior.
Note: If enclosing in a radio-shielded area (for example, metallic enclosure) an external GPS antenna may be necessary
for proper operation and performance.

Orientation and Placement

1. Horizontal with clear (non-metallic) view of sky
https://support.zonarsystems.net/hc/en-us/articles/360017847851-V4-User-Manual-and-Installation-Guide
V4 User Manual and Installation Guide – Zonar Systems Support
8/27