Table of Contents
Advertisement
4/10/2019
General Guidelines
Layout
1. V4 unit must be located a minimum of 25cm (10 in) from any person.
2. Do not place Zonar RFID tags, cables, or other equipment in any location or position which may compromise
human or equipment safety.
3. Verify placement acceptability with State DOT/Law enforcement prior to installation.
4. V4 has a temperature range of -40°C (-40°F) to +85°C (+185°F). Do not mount V4 in hot engine compartments or near
hot exhaust components.
5. Lay all components out prior to installation to check for proper cable length and interference issues.
6. Avoid mounting Zonar equipment, antennas and wiring near other radio equipment (e.g. two-way radios), PA
equipment and high energy electrical sources (e.g. cables, relays, amplifiers, etc.).
Electrical
https://support.zonarsystems.net/hc/en-us/articles/360017847851-V4-User-Manual-and-Installation-Guide
V4 User Manual and Installation Guide – Zonar Systems Support
5/27
Advertisement
Table of Contents
