Tripp Lite OmniSmart HG Owner's Manual Addendum

Owner's Manual Addendum to #93-1422
OMNISMART ™ HG
Line-Interactive UPS Systems with
Hospital-Grade Plug and Receptacles
1111 W. 35th Street
Chicago, IL 60609 USA
(120V)
Customer Support: (773) 869-1234
www.tripplite.com
The OmniSmart HG UPS systems described in this addendum have the same features and
controls as the OmniSmart and OmniPro UPS systems described in the accompanying
owner's manual with the exception of the information listed below.
Hospital Grade Plug & Receptacles: OmniSmart HG UPS systems comply with UL
1778 standards. These UPS systems feature high-impact resistant thermoplastic hospital-
grade plugs and receptacles. The superior quality of the plugs' blades and higher retention
force of the receptacles are designed to reduce the risk of accidental disconnection.
Warning: Tripp Lite does not recommend the use of any of its UPS Systems in any life
support applications in which a malfunction or failure of a Tripp Lite UPS System could
cause failure or significantly alter the performance of a life-support device.

Specifications

OmniSmart 450 HG OmniSmart 1400 HG
Output Capacity (VA/Watts): 450/280 1400/940
Battery Runtime
(Half Load/Full Load) Minutes: 17/5 24/8
Battery Recharge Time: 2-4 hrs. 2-4 hrs.
Approvals: UL, cUL, NOM UL, cUL, NOM
ALL MODELS: Input Voltage/Frequency (120V/60Hz); On-Line Input Voltage Range (75-147 volts); Voltage-Regulated Output Voltage
Range (120V+6%/-12%);On Battery Output Voltage Range (120V [ + ]5%); Output Waveform Line Mode (filtered sine wave); Output
Waveform Battery Mode (PWM sine wave); AC Surge Suppression (exceeds IEEE 587 Cat. A & B standards); AC Noise Attenuation
(>40 dB); AC Protection Mode (H to N).
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Copyright ©2003 Tripp Lite. All rights reserved.