Changing A Wiper Blade; Washing Precautions - CITROEN C-ZERO Handbook

Parking brake
If excessive travel or a loss of
effectiveness of this system is
noticed, the parking brake must
be checked, even between two
services.
This system must be checked by a CITROËN
dealer or a qualified workshop.
Only use products recommended by
CITROËN or products of equivalent quality
and specification.
In order to optimise the operation of
components as important as those in the
braking system, CITROËN selects and
offers very specific products.
After washing the vehicle, dampness, or
in wintry conditions, ice can form on the
brake discs and pads: braking efficiency
may be reduced. Make light brake
applications to dry and defrost the brakes.

Changing a wiper blade

Removing front or rear
wiper blades
F Raise the corresponding wiper arm.
F Take off the wiper blade by sliding it to the
outside.
Fitting front or rear wipers
F Put the new wiper blade in place and
secure it.
F Carefully lower the wiper arm.
https://www.automotive-manuals.net/
Practical information

Washing precautions

Never wash the vehicle while the battery
is on charge.
Before washing the vehicle, check that
the access flaps and the charging socket
covers (normal and fast) are closed
properly.
In order to avoid damaging the electric
units, the use of a high pressure jet wash
is strictly forbidden:
- under the bonnet,
- under the chassis.
Do not use a pressure greater than
80 bars when washing the bodywork.
7
87