Table of Contents
Advertisement
To navigate system menu
options
In the stop mode of DVD, use the remote
control to select the setup options.
1
During playback, press SYSTEM MENU to
enter SETUP mode.
➜
The playback will pause.
➜
The system menu appears.
2
Press 1 / 2 to select the desired SETUP page:
SYSTEM SETUP, PREFERENCE SETUP
or EXIT SETUP.
3
Press 3 / 4 to highlight an option.
4
Enter its submenu by pressing 2.
5
Move the cursor by pressing 3 / 4 to
highlight the desired item.
6
Press OK to confirm.
9
SYSTEM
MENU
System Menu Options
TV SYSTEM (default: NTSC)
This setting allows you to select the TV type to
match the color system of the television to be
connected so that the disc played on this DVD
player can be viewed on the connected TV
which supports certain TV type. Refer to owner
manual of your TV for TV type information
(NTSC or PAL).
0
●
Select NTSC if the connected TV supports
NTSC only.
●
Select PAL if the connected TV supports PAL
only.
●
Either selection is OK if the connected TV
DISC
supports both NTSC and PAL.
MENU
TV DISPLAY (default: 16:9)
●
Select 4:3 PS (Pan and Scan) for TV display at
4:3 aspect ratio if your DVD is not formatted for
widescreen viewing
●
Select 4:3 LB (Letterbox) for TV display at 4:3
aspect ratio if your DVD is formatted for
widescreen viewing.
●
Select 16: 9 (WIDE) for TV display at 16:9 aspect
ratio.
SYSTEM SETUP Page
SYSTEM SETUP
TV SYSTEM
TV DISPLAY
OSD LANGUAGE
ANGLE MARK
SCREEN SAVER
EXIT SETUP
23
Advertisement
Table of Contents
