TV
Watching TV
1
On the remote control, press B
press TV once or more to select TV or CATV
mode (or on the set, STANDBY-ON and
SOURCE).
2
In CATV, press OK on the remote control to
select HRC, IRC, STD or AUTO mode.
➜
Make sure that the set is properly connected
with CATV cable before using using CATV. (see
Installation, Connecting CATV/additional
TV antenna)
3
The first time you use the TV, press and hold
PROG on the set (PROGRAM on the remote
control) until the channel number starts running.
➜
The displayed "TV" (or "CATV") and running
channel number turn to blue from green,
indicating auto search and store in progress.
➜
Available channels are programmed.
➜
After all channels are stored, displayed "TV"
(or "CATV") and channel number turn to green
from blue. The first auto stored channel will then
automatically play.
16
4
B
B to on, then
B
B
Press CHANNEL -, + to select your desired
channel (on the remote control, CH +/- (¡ /
™)).
Or
Use the Numeric Keypad (0-9) on the
remote control to select the channel number
directly. e.g.
Channel 2: Press 0 and then, 2
Channel 10, Press 1 and then, 0
STANDBY-ON
DISC
TV
1
2
5
6
9
SYSTEM
MENU
VOLUME
OSD
PICTURE
PROGRAM
TUNER
AV
3
4
7
8
0
DISC
MENU
CH
GOTO
DISPLAY
VISUAL